Download  Print this page

Appendices; Troubleshooting - Acer V6810 User Manual

Hide thumbs

Advertisement

Appendices

Troubleshooting

If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
Problem
1
No image appears
onscreen
2
Partial, scrolling
or incorrectly
displayed image
(For PC)
Make sure all the cables are correctly connected as
described in the "Getting Started" section.
Ensure none of the connector pins are bent or
broken.
Make sure the projector is switched on.
For an incorrectly displayed image:
Open "My Computer > Control Panel," and
then double-click the "Display" icon.
Select the "Settings" tab.
Verify that your display resolution setting is
lower than or equal to 1600 x 1200 or 1920 x
1080.
Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
Verify that the resolution setting is lower than
or equal to 1600 x 1200 or 1920 x 1080.
Click the "Change" button under the
"Monitor" tab.
Click "Show all devices > Standard monitor
types" under the SP box, and choose the
resolution mode you need under the "Models"
box.
Verify that the resolution setting of the
monitor display is lower than or equal to 1600 x
1200 or 1920 x 1080.
Solution
21

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: