Advertisement

Acer DLP Projector
V6810/E8610C/HT-4K13/
HV832/TH-733/A4K1719/
H6810/E8610/HE-4K13/
GM832/VH-733/A4K1720
Series User's Guide
Copyright © 2018. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 02/2018

Advertisement

Table of Contents
loading

Summary of Contents for Acer V6810

  • Page 1 Acer DLP Projector V6810/E8610C/HT-4K13/ HV832/TH-733/A4K1719/ H6810/E8610/HE-4K13/ GM832/VH-733/A4K1720 Series User's Guide Copyright © 2018. Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 02/2018...
  • Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
  • Page 3 Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
  • Page 4 • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp.
  • Page 5 Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •...
  • Page 6 Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. • Contact your local dealer or Acer service center when you need to change the lamp. • The product will detect the life of the lamp itself. Please contact your local dealer or Acer service center for changing the lamp, when lamp warning message displays.
  • Page 7 Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/index.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury,...
  • Page 8: Precautions

    When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service center.
  • Page 9: Table Of Contents

    Information for Your Safety and Comfort First Thing First viii Usage Notes viii Precautions viii Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout Getting Started Connecting the Projector Turning the Projector On/Off Turning On the Projector Turning Off the Projector Adjusting the Projected Image Adjusting the Height of the Projected Image...
  • Page 10 Compatibility Modes Regulations and safety notices...
  • Page 11: Introduction

    This product is a single-chip DLP projector, including the following outstanding features: ® • technology • Acer ColorBoost technology delivers vivid, life-like images • High brightness and contrast ratio • Versatile display modes enable optimum performance in any situation • HDTV (720p, 1080i, 1080p) supported •...
  • Page 12: Package Overview

    Package Overview This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable HDMI cable (Optional) (Optional) Quick Start Guide Security card User’s guide (CD- Remote control...
  • Page 13: Projector Overview

    Projector Overview Projector Outlook Front/upper side Description Description Control panel Zoom ring and Focus ring Lens cap Projection lens Power key and Power indicator LED 7 Remote control receiver IR remote sensor Rear side Note: Connector interface is subject to model's specifications. Description Description Audio input connector...
  • Page 14: Control Panel

    Control Panel Function Description LAMP Lamp indicator LED. POWER Power indicator LED Keystone Adjusts image distortion caused by tilting projection. Power key Refer to the "Turning the Projector On/Off" section. ENTER Confirms your selection of items. BACK Cancels your selection, or goes back to previous page. TEMP Temperature indicator LED.
  • Page 15: Remote Control Layout

    Remote Control Layout Model No:J-25081 MC.JPC11.001 Function Description POWER Refer to the "Turning the Projector On/Off" section. AcuM. No function. Press to open the HDR menu. Adjusts image distortion caused by tilting projection. Keystone Four Selects items or makes adjustments to your selection. directional selection keys...
  • Page 16 Function Description 16 MENU Launches the Onscreen Display (OSD) menu or exits the OSD menu. 17 FREEZE No function. 18 HDMI/MHL To change source to HDMI™ (or MHL). (for the model with HDMI™ or MHL connector) 19 HIDE Press "HIDE" to hide screen image; press again to display the image.
  • Page 17: Getting Started

    Getting Started Connecting the Projector Smart devices Display Video Output Speakers Screen...
  • Page 18 Description Description Power cord RS232 cable Audio cable WirelessHD dongle HDMI (MHL) cable 10 Wireless dongle VGA to component video/HDTV adapter 11 Wired remote control VGA cable 12 RJ45 cable 3 RCA component cable 13 12V DC cable Composite video cable Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.
  • Page 19: Turning The Projector On/Off

    Turning the Projector On/Off Turning On the Projector Ensure that the power cord and signal cable are securely connected. The Power LED will light red. Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player, etc.).
  • Page 20: Adjusting The Projected Image

    Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with two elevator feet for adjusting the image height. To raise the image: Use the front Tilt adjusting wheel to raise the image to the desired height and angle.
  • Page 21: How To Get A Preferred Image Size By Adjusting Distance And Zoom

    How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. To obtain an image size of 70", set the projector at a distance between 2.3 m and 2.7 m from the screen and adjust the zoom level accordingly.
  • Page 22: User Controls

    User Controls Onscreen Display (OSD) Menus The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control panel or remote control.
  • Page 23: Color

    COLOR There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Standard: For common environment. • Movie: For brighter and general movie/video/photo playing. Picture Mode • User 1/User 2: Memorize user’s settings. • Silent: Minimizes the acoustic noise.
  • Page 24 Adjusts the color balance of red and green. • Press to increase the amount of red in the image. Tint • Press to increase the amount of green in the image. Adjusts the Sharpness of the image. • Sharpness Press to soften the image.
  • Page 25 MoviePro • Color Enhancement: Allows you to fine-tune the saturation of colors with larger flexibility. It modulates complex color algorithms to flawlessly render saturated colors, fine gradients, intermediate hues and subtle pigments. • Skin Tone: Provides a smart adjustment of hue only for calibrating people's skin color, not other colors in the image.
  • Page 26: Image

    IMAGE Use this function to choose your desired aspect ratio. • Auto: Keeps the image with original width-height ratio and maximizes the image to fit native horizontal or vertical pixels. • 4:3: The image will be scaled to fit the screen and Aspect Ratio displayed using a 4:3 ratio.
  • Page 27: Installation

    INSTALLATION • Front: The factory default setting. • Front Ceiling: Turns the image upside down for ceiling- mounted projection. • Rear: Reverses the image so you can project from behind Projection a translucent screen. • Rear Ceiling: Reverses the image so you can project from behind a translucent screen for ceiling-mounted projection.
  • Page 28: System Setup: Basic

    SYSTEM SETUP: BASIC Sets a language for the OSD menus. Use Language select your preferred language. Background Sets the background color for the projector. Color Use this function to select your desired startup screen. If you Splash Screen change the setting, it will take effect when you exit the OSD menu.
  • Page 29: System Setup: Advanced

    SYSTEM SETUP: ADVANCED • HDR: The projector supports HDR imaging sources. It can automatically detect the dynamic range of the source, and optimize settings to reproduce contents under wide range of light conditions. If the input source is not defined with dynamic range, you can also manually select HDR or SDR for it.
  • Page 30 If you enter the wrong password, the password error message will appear, and the INPUT CURRENT PASSWORD message follows. If you absolutely do not remember the password, you can use the password recall procedure. If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a short time.
  • Page 31: Appendices

    Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem Solution No image appears • Make sure all the cables are correctly connected as onscreen described in the "Getting Started"...
  • Page 32 Partial, scrolling • For an incorrectly displayed image: or incorrectly • Follow the steps for item 2 (above) to adjust displayed image the resolution of your computer. (For notebooks) • Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5] •...
  • Page 33 If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service center. OSD Messages Condition Message Reminder...
  • Page 34: Led & Alarm Definition Listing

    LED & Alarm Definition Listing LED Messages Message Power LED LAMP LED TEMP LED Standby (Power cord plugged in) Power on Blue flashing Normal operation Blue Cooling state Red flashing Downloading Red flashing Red flashing Red flashing Error (Phosphor/Color wheel Blue start failure) Error (Phosphor/Color wheel...
  • Page 35: Ceiling Mount Installation

    Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Choose the length combination based on actual environment. (CM-01S doesn’t include Type 2 and Type 3.) Type 3 Type 1...
  • Page 36 Type 2 and Type 3: Alternatively, for the larger size, use the sliding extensions for more supports. Type 3 Type 1 Type 2 Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.
  • Page 37 Screw Type B Washer Type Diameter (mm) Length (mm) Large Small 198.10 1.45 189.05 9.04 343.06 92.47 Unit: mm...
  • Page 38: Specifications

    Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation. Projection system ™ Resolution 3840 x 2160 with XPR 1920 x 1080 without XPR Computer compatibility Refer to the "Compatibility Modes" section for more information.
  • Page 39 Standard package contents • AC power cord x 1 • Remote control x 1 • Battery x 2 (for the remote control) • Quick start guide x 1 Accessory (optional) • User's guide (CD-ROM) x 1 • VGA cable x 1 •...
  • Page 40 Compatibility Modes VGA Analog - PC Signal H.Frequency Mode Resolution V.Frequency [Hz] [KHz] 31.47 37.86 640 x 480 37.50 43.27 35.20 37.88 SVGA 800 x 600 48.08 46.88 53.67 48.36 56.48 1024 x 768 60.02 68.68 63.85 1152 x 864 67.50 77.10 SXGA...
  • Page 41 1280 x 768 47.78 1280 x 768 60.29 1280 x 768 68.63 WXGA 1280 x 720 45.00 1280 x 800 49.70 1440 x 900 55.94 WSXGA+ 1680 x 1050 65.29 acer_16:9 1366 x 768 47.71 1920 x 1080-RB 66.60 HD 1080 1920 x 1080-EIA 67.50 WUXGA...
  • Page 42 MAC19 1024 x 768@75Hz 75.02 60.241 MAC21 1152 x 870@75Hz 75.061 68.681 WXGA_60 59.87 47.776 WXGA_75 1280 x 768 74.893 60.289 WXGA_85 84.837 68.633 WXGA_60 1280 x 720 WXGA_60 1280 x 800 59.81 49.702 WXGA+_60 1440 x 900 59.887 55.935 1680 x1050_60 1680 x 1050 59.954...
  • Page 43 1080p 1920 x 1080 23.98 26.97 1080p 1920 x 1080 33.75 2160/24P 3840 x 2160 2160/25P 3840 x 2160 56.25 2160/30P 3840 x 2160 67.5 2160/50P (HDMI 1) 3840 x 2160 112.5 2160/60P (HDMI 1) 3840 x 2160...
  • Page 44 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 45 Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Compliant with Russian regulatory certification UA.TR.060 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.
  • Page 46 Marketing Name: 733/H6810/E8610/HE-4K13/GM832/VH-733 We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied:...
  • Page 47 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Table of Contents