There are many factory presets optimized for various types
There are two user-definable modes if the current available
picture modes are not suitable for your need.
Adjusts the brightness of the image.
Controls the degree of difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
Adjusts a video image from black and white to fully
Bright: For brightness optimization.
Standard: For common environment.
Movie: For brighter and general movie/video/photo
User 1/User 2: Memorize user's settings.
Silent: Minimizes the acoustic noise. It is suitable for
the need of watching movies that requires an ultra-
quiet environment so that you won't be disturbed by
the noise of the projector. This mode is only available
when the Image > Silent menu is set at On.
Load Settings: You can use one of the picture modes
as a starting point and you can further fine-tune the
image based on the selections listed below.
Rename User Mode: Select to rename the customized
picture modes (User 1 or User 2). The new name can
be up to 9 characters including English letters (A-Z, a-
z), digits (0-9), and space (_).
to darken the image.
to lighten the image.
to decrease the contrast.
to increase the contrast.
to decrease the amount of color in the
to increase the amount of color in the