Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
To open the OSD menu, press "MENU" on the control panel or remote
When the OSD is displayed, use
to adjust the settings.
Use "ENTER" to confirm the selected menu item.
To go back to the previous menu, press "BACK".
To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
Note: Some of the following OSD settings may not be available. Please refer
to the actual OSD of your projector.
move through the menu