Table of Contents
Advertisement
newbook.book Page 41 Tuesday, October 23, 2001 12:27 PM
You can tell whether or not your battery needs to be recharged by
checking the
indicator (it's located in the upper-right corner of
the display). The presence of all three bars indicates a full charge,
two bars indicates a medium charge, and one bar indicates a
minimum charge. No bars (the battery icon is empty) indicates the
battery no longer has any charge and must be recharged.
Two to three minutes before the battery charge level gets too low to
operate the phone, the battery sensor will let you know by blinking an
empty battery icon (
), and sounding a tone. If you continue to
operate the phone without charging the battery, the phone will turn
off automatically. If this happens, your wireless call will be ended. But
if you plug into a charging device, you can continue your call. Be sure
to monitor the battery strength icon and make sure your battery is
sufficiently charged.
The travel charger allows you to charge your phone's battery from any
standard 110VAC wall outlet. Also, using the travel charger allows you
to make a phone call while the battery is charging. The travel charger
will fully charge an "empty" standard battery in about three hours,
and an "empty" extended battery in about four hours.
Follow these steps:
1.
With the battery connected to the phone, connect the travel charger to
the accessory connector on the bottom of the phone.
2.
Connect the charger to a standard 110 AC wall outlet. The battery
begins charging.
41
Advertisement
Table of Contents
