1. In standby mode, press the MENU (left) soft key (
then press
for Key Beep. The following options appear in the
display:
Volume
v
Tone Length
v
Volume is highlighted.
2. Press the
Use the volume keys or navigation keys to set the volume level
v
for keypad tones.
Press the
v
is reached. You are returned to the Key Beep sub menu.
3. Use the navigation keys to highlight Tone Length, then
press the
Use the navigation keys to highlight Long or Normal.
v
Press the
v
Key Beep sub menu.
Alerts
You can set your phone to sound an alert whenever you
enter or leave your service area, connect or disconnect a
call, and other options.
1. In standby mode, press the MENU (left) soft key (
then press
for Alerts
Minute Beep — Sound an alert ten seconds before each
v
elapsed minute of a call.
Service — Sound an alert when you go into and out of
v
coverage areas.
Connect — Sound an alert when you connect a call.
v
(for Setup),
9
wxyz
key to adjust the Key Beep volume.
OK
key when the desired key beep volume setting
OK
key.
OK
key to save your setting. You are returned to the
OK
(for Setup),
9
wxyz
The following options appear in the display:
.
Sounds Settings
(for Sounds), and
3
def
(for Sounds), and
3
def
Section 13: Setup
),
3
def
),
4
ghi
185