Samsung SCH A850 User Manual page 151

"Say a Command" appears in the display and is pronounced
through the earpiece, followed by a list of available
commands.
•
In standby mode, press the MENU (left) soft key (
press
8
tuv
for Voice Command.
Note: You can also set your phone to start VoiceSignal when you open the
phone. See "Voice Setting — Voice Launch" on page 159 for more
information.
The following voice commands appear in the display:
•
Voice Dial — Lets you dial the phone by saying any name
stored in your contact list, without ever having to record, or
"train" that name. VoiceSignal automatically voice-activates all
your contacts, even if you have hundreds of them stored on
your phone. You can also dial any telephone number, even if it
is not stored in your contact list, by saying the digits in the
number. (See "Voice Dialing" on page 38 for more information.)
•
Voice Memo — Lets you access the voice memo feature of
your phone. (See "Voice Memo" on page 152 for more
information.)
•
Today — Lets you access the Today feature of your phone. (See
"Today" on page 160 for more information.)
•
Calendar — Lets you access the Calendar feature of your
phone. (See "Scheduler" on page 162 for more information.)
•
Contacts — Lets you look up and display contact information
for any name stored in your Contacts list by saying the name.
(See "Finding a Contacts Entry" on page 75 for more
information.)
•
Status — Lets you say a single command ("Status") to check
your phone's network coverage, signal strength, and battery.
Note: Speaking clearly, say the command that you want to use. If
VoiceSignal does not recognize a command, it prompts you to repeat the
command. If VoiceSignal still does not recognized the command, it tells you
"Sorry, no match found" and cancels voice recognition.
(for Tools), (for Voice Recognition), and
1
@
) )
Voice Recognition
), then
Section 12: Tools
1
@
)
)
151