Banner
Create your own personalized greeting that appears in
the display while your phone is in standby mode.
1. In standby mode, press the MENU (left) soft key (
then press
for Banner
Tip: Press and hold
2. Enter a word or short phrase to appear in your phone's
display while in standby mode (Up to 12 characters).
See "Section 5: Entering Text" on page 63 for more
information.
3. Press the
Backlight
You can set the backlight for your display or keypad to
remain on for a specified period of time or remain on as
long as the folder is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the MENU (left) soft key (
then press
for Backlight
display
:
LCD — Sets the time the internal display backlight remains on
v
after a period of inactivity. Optional settings are: 5 seconds, 10
seconds, 15 seconds, and Folder Open.
Keypad — Sets the amount of time the keypad backlight
v
remains on after a period of inactivity. Optional settings are: 5
seconds, 10 seconds, 15 seconds, and Folder Open.
(for Setup),
9
wxyz
.
to erase an existing banner, if necessary.
CLR
key to save the new banner.
OK
(for Setup),
9
wxyz
The following sub menus appear in the
.
Display Settings
(for Display), and
2
abc
(for Display), and
2
abc
Section 13: Setup
),
3
def
),
4
ghi
179