Page 4
HARDWARE LISTING Stickers Handle Set 5 X 60MM 8 X 30MM X 8pcs X 18pcs X 4 sets 1 set = 8pcs 3.5 X 14MM 4 X 12MM X 44pcs X 3pcs X 24pcs X 3pcs M4x30mm M3.5x14mm 3 X 16MM Wall Fixing set 12 X 10MM X 10 sets...
Page 5
Hinge 6 X 30MM 7 X 39MM 4.2 X 40MM X 2pcs X 12pcs X 18pcs X 6pcs Shelf Support 15 X 12MM X 1pc X 8pcs X 12pcs X 3pc X 3pc X 3pc 5 of 18...
Page 13
IMPORTANT: To prevent furniture from tilting forward it is recommended that you: 1. Avoid fully opening all drawers at the same time. 2. Prevent small children from climbing onto drawers. Your local hardware store will have locking devices that can be fitted to drawers to prevent small children from opening them and using them as steps.
Page 14
STEP 1: Fix bracket to top panel at the back of furniture by using screws M3.5*14MM . 14 of 18...
Page 15
STEP 2: Fix bracket to wall behind furniture by using screws below furniture top. Join wallboard and the furniture Wallboard Furniture top Bracket Wall 15 of 18...
Page 16
SAFETY BRACKETS INSTRUCTIONS 1.Attach a bracket to the wallboard with the long screws provided. 2.Attach a bracket to the furniture frame under the top with the short screws provided. 3.Move the furniture into its final position. Thread a strap through the bracket as shown in the illustration, tighten strap until snug.
Page 17
Maximum Load Capacity: Each Drawer Shelf 10kg Your Oslo Credenza is now complete and ready for use 17 of 18...
Need help?
Do you have a question about the OSLO CREDENZA and is the answer not in the manual?
Questions and answers