Hitachi LP-AW4001 User Manual page 92

8. Other Functions
projector by SNMP.
Port Settings
1) Select [Port Settings] on main menu in Projector Web Control.
2) Click the [Download MIB File]
3) Click the [Enable] check box to open the SNMP Port. Set the address to send
the SNMP trap to when a Failure/Warning occurs.
Security Settings
1) Select [Security Settings] on main menu in Projector Web Control.
2) Click the [SNMP] and set the community name on the displayed screen.
Alert Settings
1) Select [Alert Settings] on main menu in Projector Web Control.
3) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings.
Clear the [Enable
4) Click the [Apply]
NOTE
[Security Settings] is changed.
92
48)
58)
51)
[Port Settings] or