Hitachi LP-AW4001 User Manual page 30

2. Connection to the network
Item
NETWORK
SETUP
/
PROJECTOR
NAME
30
Any name can be set to the projector to identify it on the
network.
NAME and press the
button. The PROJECTOR
NAME dialog will be
displayed.
Use displayed software keyboard to enter PROJECTOR
NAME.
Use the ENTER or
characters.
To erase 1 character at one time, press the RESET button
and press the ENTER or
characters will be erased. Up to 64 characters can be
input for the PROJECTOR NAME.
on the character to be
changed. After pressing the
ENTER or
character is selected. Then,
follow the same procedure
the cursor to the OK on
ENTER or
Description
button to select and enter
button at the same time. Also if
button, 1 character or all
button, the
button.
ENTER or button.