Advertisement
Quick Links
Notes: After turning on the
turns to a blinking red light, the battery needs to be replaced.
Testing
1. Turn the
on by turning OFF & Intensity Dial and set to
the intensity level you prefer.
2. Set the Sensitivity Dial to the 5 Level.
3. Test by scratching the
rough
(as shown in the diagram)
The green light on the top of
collar turns to a blinking
green light. Then repeat
the same process if you
want to try it again.
When you set the dial on the 5 Level, it may be sensitive
enough that the No Bark Collar can be activated easily by a small
sound or tap.
No Bark Collar: 1X4LR44/6V
, If the green LED indicator
,,
surface of the test tool
on the
using a fingernail
or pen.
,,
PET851
,
Owner s Manual
Advertisement
Related Manuals for Petainer PET851
Summary of Contents for Petainer PET851
- Page 1 2. Set the Sensitivity Dial to the 5 Level. 3. Test by scratching the rough surface of the test tool on the PET851 (as shown in the diagram) using a fingernail or pen. The green light on the top of collar turns to a blinking green light.
- Page 2 Sensitivity Dial Main Features 7 intensity levels (1-7) for a wide variety of dispositions The sensitivity Dial is to adjust the sensitivity to the Dog 5 Sensitivity levels (1-5) adjustable for different dogs and Bark according to the environments the dog is in. environments Level 5 is the most sensitivity Easy testing method to check the No Bark Collar...