Advertisement
300M Remote Dog Training Collar
with 0-100lvs static and vibration modes
Please read this entire guide before beginning
Model Number :
IS-PET998DR-1
IS-PET998DRB-1
Model Number :
IS-PET998DR-2
IS-PET998DRB-2
-1-
Important Safety Information
WARNING
Not for aggressive dogs. Do not use this product if your dog is aggressive, or if
your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury
and even death to their owner and others. If you are unsure whether this product is
appropriate for your dog, please consult your veterinarian or certified trainer.
CAUTION
Risk of skin damage. Please read and follow the instructions in this manual.
Proper fit of the collar is important. A collar worn for too long or made too tight
on the pet's neck may cause skin damage. Ranging from redness to pressure
ulcers; this condition is commonly known as bed sores. These collars can cause
pressure necrosis if used incorrectly and is often misidentified as burns.
Avoid leaving the collar on the dog for more than 12 hours per day.
If possible, reposition the collar on the pet's neck every 1 to 2 hours.
Check the fit of the collar to prevent excessive pressure; follow the
in this manual.
Never connect a lead to the electronic collar; it will cause excessive
on the contacts.
When using a separate collar for a lead, don't put pressure on
collar.
Wash the dog's neck area and the contacts of the collar weekly with
cloth.
Examine the contact area daily for signs of a rash or a sore.
If a rash or sore is found, discontinue use of the collar until the skin has healed.
If the condition persists beyond 48 hours, see your veterinarian.
These steps will help keep your pet safe and comfortable. Millions of pets are
comfortable while they wear stainless steel contacts. Some pets are sensitive
to contact pressure. You may find after some time that your pet is very tolerant
of the collar. If so, you may relax some of these precautions. It Is important to
c o n t i n u e d a i l y c h e c k s o f t h e c o n t a c t a r e a . I f r e d n e s s o r s o r e s a r e f o u n d ,
discontinue use until the skin has fully healed.
instructions
the electronic
-2-
pressure
a damp
Advertisement
Related Manuals for Petainer IS-PET998DR-1
Summary of Contents for Petainer IS-PET998DR-1
- Page 1 Model Number : on the pet's neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores. These collars can cause IS-PET998DR-1 pressure necrosis if used incorrectly and is often misidentified as burns. IS-PET998DRB-1 Avoid leaving the collar on the dog for more than 12 hours per day.
-
Page 2: Features
MAIN FEATURES 1. Antenna: Transmits the signal from the Transmitter to the Receiver Collar. 2.Led light: This light will be on when pressing the LED light button. 1. Easy-to-use, ergonomic transmitter. 3. LED Indicator: This light will flash when the “Y” button is pressed. The light 2. -
Page 3: Charge Remote Transmitter/Collar Receiver
HOW TO USE 3. In working mode, if you want to reconnect the receiver to the transmitter, simply press the reset button with a pen or paper clip, there will be a beep sound to Note: Please charge before using the product! indicate that it is ready to encode. -
Page 4: General Training Tips
Notes for use (8) During training, look for all the positive changes in the dog's behavior remember to reinforce them promptly with ample praise and reward. 1. The lifetime of the batteries, vary according to how often you use the product.