How To Use Magnetic Jet - j&a EPISODE LX User Manual

How to USE Magnetic jet !

WARNING:
DO NOT RUN DRY, BASIN MUST FILLED WITH WATER TO LEVEL INDICATOR.
CAUTION: MAGNETIC JET COVER ASSEMBLY MUST ALIGN WITH DISCHARGE PORT
POSITIONED AT 3/9 O'CLOCK.
WHEN READY TO USE, MAKE SURE JET COVER IS POSITIONED AT 3 /9 OCLOCK FOR
PROPER WHIRLPOOL ACTION IN THE BASIN. IF JET COVER IS NOT ALIGN AT 3/9 O'CLOCK,
WATER WILL SPLASH OUTSIDE OF THE BASIN.
PROPER WAY TO USE MAGNETIC JET SYSTEM
1- FILL THE WATER TO WATER LEVEL INDICATOR.
2- HOLD MAGNETIC JET FIRMLY TO BRING CLOSER TO THE ROUND MAGNETIC FILED AND DO NOT RELEASE
THE MAGNETIC JET PREMATURELY OR THIS WILL CAUSE IMPACTS ON THE JET COVER AND THE ROUND
MAGNETIC FIELD(HOUSING) SHORTENING THE LIFE EXPECTANCY OF THE JET COVER. WHEN THE JET
COVER NEARS THE ROUND MAGNETIC FIELD, PLACE JET COVER ONTO THE FOUR DIMMPLE AREA (SEE
DIAGRAM). THE JET COVER MUST ALIGN WITH DISCHARGE PORTS POSITIONED AT 3/9 O'CLOCK.
3- WHEN FINISHED WITH CLIENT, DO NOT REMOVE MAGNETIC JET UNTIL MOTOR IS FULLY STOPPED.
4- WHEN MOTOR IS FULLY STOPPED, REMOVE MAGNETIC JET COVER FROM THE MOTOR AND REMOVE JET
COVER AND IMPELLER FOR SANITIZATION.
Motor
Round
Magnetic Field (housing)
Bottom View of
Magnetic Jet Base
Magnetic
Jet Base
Magnetic
Impeller
Magnetic
Whirlpool jet cover