Positive posture SOL P1900 Owner's Manual page 15

ASSEMBLY
Assembling the Chair, continued...
• To prevent disconnection, be sure to double check all connections by gently pulling on the electrical
connector and air hose.
• If not connected properly, the air cells will not inflate as designed.
STEP 1
Unbox chair and place in designated area.
STEP 2
A) Plug the power cord into the back base of
the chair, and
B) Turn on the main power. The chair will
automatically incline.
Figure A
Figure B
CAUTION
STEP 3
Place the legrest in front of the chair, then
connect the one electrical connector and the
one airline from the legrest to the electrical
connector and airline on the base of the chair.
14