Assembly - Positive posture SOL P1900 Owner's Manual

ASSEMBLY

Safety During Installation
• Do not install the chair in an area of high humidity, such as a bathroom or sauna.
• Do not use the chair in an excessively humid or dusty environment as this may result in malfunction
or electric shock.
• Do not use the chair in a room with a temperature of 104 degrees or higher.
• Do not expose the chair to heaters, stoves, or direct sunlight.
• Keep fire sources, such as cigarettes and ashtrays, away from the chair.
• Ensure chair is installed on a flat and level surface to avoid tipping over.
• As the chair is heavy, please exercise extra care not to damage the floor when positioning the chair.
Assembly Preparation
• Ensure there is an allowance of at least 15.75" (40 cm) behind, and 24" (61 cm) in front of the chair to allow
the backrest to recline and the leg rest to extend without obstruction during operation.
• Maintain a minimum distance of 3' (92 cm) from AV devices, such as a TV or radio, to prevent
signal interference.
• It is recommended that a carpet be placed under the chair to prevent scratching the floor and to reduce
noise during operation.
• As the chair is heavy, please exercise extra caution.
Assembling the Chair
Important: Before starting, check the supplied items to ensure all parts are included in the package.
Tools Required: Philips Head Screwdriver
Chair base
CAUTION
TO AVOID DAMAGE
Legrest
13
Power Cord
Screw (x2)