True zero gravity massaging recliner with heat (28 pages)
Summary of Contents for Positive posture Brio Sport
Page 1
Follow the instructions in this manual for the safe use and maintenance of your massage chair. This manual should be kept on hand as a reference. This product is designed for home use. POSITIVE POSTURE MASSAGE CHAIR BRIO SPORT...
CONTENTS Introduction Cautions & Warnings Main Features Parts & Functions Assembly Moving the Chair Remote Functions Sessions Operation & Use Care & Storage Troubleshooting Warranty & After Sales Service Specifications NOTE: The pictures in this manual are only for reference. Please refer to the actual product.
INTRODUCTION Congratulations on your Positive Posture Brio Sport massage chair purchase! As someone who cares about health and fitness, your goal is to maximize your body’s performance. A complete fitness regimen combines exercise with recovery. Wear-and-tear and minor injuries naturally occur with the strenuous movements associated with exercise.
CAUTIONS & WARNINGS Indications, Symbols, & Descriptions This action could result in serious injury or death WARNING This action could result in personal injury or damage to property CAUTION This action is prohibited Further action is required Do not disassemble Unplug power cord from wall outlet Important Safety Precautions •...
Page 5
CAUTIONS & WARNINGS General Safety WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK Always unplug this appliance from the electrical outlet immediately after using and before cleaning. CAUTION TO REDUCE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS •...
Page 6
CAUTIONS & WARNINGS Grounding Instructions This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric shock. This product is equipped with an equipment-grounding conductor and a grounded plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Page 7
In case of any of these scenarios, please contact Positive Posture Service immediately. • Make sure all air openings are free of lint, hair, or other debris. Do not operate this appliance with the air openings blocked.
Page 8
CAUTIONS & WARNINGS Safety During Installation WARNING TO AVOID ACCIDENT AND INJURY • Install the chair on a flat and level surface. • Allow at least 5“ (12.75 cm) clearance from the chair’s back to a wall to allow sufficient space for reclining up and down. •...
Page 9
• Check for any holes or tearing in the active massage area of the chair before each use. If a tear is noticed, stop using immediately and contact Positive Posture Service. • Check the position of the roller mechanism prior to sitting down. If the rollers are not in the storage position, turn the power on and check that the chair is operating properly.
Page 10
• If a specific operation does not start or you find any incidence of abnormality, stop using the chair, turn off the main power switch, and unplug the cord from the wall outlet. Call Positive Posture immediately.
Page 11
• Always store the chair in a low humidity environment. • Do not place any objects on the chair. • In case of malfunction, do not attempt to repair. Contact Positive Posture Service. • Do not modify any part of the chair.
(back of your head) down to your glutes and hamstrings. bands, arms, hands, and shoulders. Your body and mind The Brio Sport L-track offers a total of 49” of back will benefit from the healing sensations of this carefully coverage.
Page 13
MAIN FEATURES Wall Hugging Designed to fit almost anywhere, the unique wall hugging technology requires only 4” (10 cm) between the backrest and the wall. USB Charger Port Charge your device while you recharge your mind, body and soul. Stylish and Easy Remote Control Easy to read and easy to use, our tactile remote combines style and functional simplicity.
PARTS & FUNCTIONS Pillow Left Shoulder Unit Right Backpad Shoulder Left Arm Unit USB Port Right Arm Remote Control Seat Leg Rest Remote Control Pocket Back Cover Foot Rest Main Power Switch...
Page 15
PARTS & FUNCTIONS Sport4D massage mechanism (shown in storage position) Right Shoulder Air Left Shoulder Air Right Arm Air Left Arm Air Left Hip Air Right Hip Air Calf Air Foot Air Foot Rollers...
ASSEMBLY Safety During Installation CAUTION TO AVOID DAMAGE • Do not install the chair in an area of high humidity, such as a bathroom or sauna. • Do not use the chair in an excessively humid or dusty environment as this may result in malfunction or electric shock.
Page 18
ASSEMBLY Assembling the Chair Important: Before starting, check the supplied items to ensure all parts are included in the package. Base Arms Foot Rest (x2) Remote Head Pillow Supplemental Backpad Back/Seat Pad Low Back Power Cord Straight Pins Foot Roller Buffer Pad (x2) (for carry handles) Buffer Pads...
Page 19
ASSEMBLY Assembling the Chair, continued... CAUTION • To prevent disconnection, be sure to double check all connections by gently pulling on the electrical connectors and air hoses. • If not connected properly, the air cells will not inflate as designed. STEP 1 STEP 3 Unbox chair and place in designated area.
Page 20
ASSEMBLY Assembling the Chair, continued... STEP 4 Lay the Back/Seat Pad down so it sits on the base of the chair. Connect the heat line by pressing the line located on the back left of the main body of the chair together with the heat line Heat located on the underside of the Back/Seat Pad.
Page 21
ASSEMBLY STEP 7 Secure the Foot Rest’s flap to the base of the chair by aligning the velcro just below the zipper for the seat pad as shown in Figure 7A. Then secure the zipper from the Foot Rest to the zipper on the seat pad of the chair as shown in Figure 7B.
Page 22
ASSEMBLY Assembling the Chair, continued... STEP 8 Install the arms. Unbox the right arm. B. Lift the arm to align the arm’s connection points (upper hook, and the two bolt holes on the base/bracket of the arm) as show in Figure 8B. Once aligned, carefully install the 2 screws to secure the arm to the base as shown in Figure 8C.
Page 23
ASSEMBLY Assembling the Chair, continued... STEP 9 Connect the Head Pillow to the Supplemental Back Pad by securing with zippers as shown in Figure 9A, then secure this to the chair, by slipping the Head Pillow flap under the loop located at the top/head of the chair as show in Figure 9B. Head Pillow Supplemental...
Page 24
ASSEMBLY Assembling the Chair, continued... STEP 12 Insert the remote control into the remote pocket and manage the remote cable along the back of the chair by securing it with the two velcro tabs located on the back side of the right arm/base as shown in Figure 12.
MOVING THE CHAIR CAUTION TO AVOID DAMAGE • Never move the chair while it is operating or when someone is in it. • As the chair is heavy, please exercise extra care not to abruptly drop it. This may cause damage to the floor as well as the internal components of the chair.
REMOTE FUNCTIONS CAUTION TO AVOID DAMAGE • Do not sit, step, or place heavy objects on the remote control. • Do not drop the remote control. • It is recommended that the remote control be placed in the remote pocket when not in use. •...
Page 27
REMOTE FUNCTIONS • Press to turn the remote control power on. When the power is off, the remote screen is blank, and the Power/Pause button is not illuminated. When the power is ON, the remote screen shows data and the Power/Pause button will glow white. •...
Page 28
REMOTE FUNCTIONS • Use the arrows to navigate through the menu(s) on the LCD screen (up, down, left, right). • After navigating to the desired selection within the LCD or home screen menu, press to select/activate the option. • Press to adjust the reclining angle of the chair. •...
SESSIONS Choose from eleven programmed and focused massage sessions. Each sessions lasts approximately 15 minutes and, unless otherwise noted, can be selected by navigating through the easy-to-use menus on the remote display. Fitness experts will tell you that a complete workout routine includes more than just exercise itself. A complete routine also cares for the wear- and-tear and minor injuries that naturally occur with strenuous or regular movement.
Page 30
SESSIONS Focused Sessions Neck & Shoulders Glutes & IT Band Focused kneading massage around the neck and shoulders The perfect session for runners. Works the IT bands and designed to help loosen the muscles of the upper back. the glutes. Low Back Encourages blood flow to this very typical problem area for active adults and mobilize and stretch your low back with...
OPERATION & USE WARNING TO AVOID INJURY Always check your surroundings before beginning a massage to ensure that no people, pets, or objects will be hit or squeezed by the reclining back or leg rest. CAUTION TO AVOID DAMAGE AND INJURY •...
Page 32
OPERATION & USE Positioning Yourself in the Chair HEAD REST POSITIONING • When the chair is off, the rollers are stored in the top of the back rest. This is known as the storage position. If the rollers are not in the storage position, simply reset by pressing the Power button on the remote control before sitting on the chair.
Page 33
OPERATION & USE CAUTION TO AVOID INJURY • If you feel the massage is too strong, reduce the stimulation using the Massage Intensity button as described earlier in this manual. If the massage remains too strong, stop operation immediately. • Do not place hands or feet into the roller tracks, into the space between the seat and back, or into the moving parts.
Page 34
OPERATION & USE Starting a Massage • Ensure remote power is ON. The Power/Pause button will glow white. • Use the Remote navigation arrows to scroll through the menus. As you navigate the menus, the black highlight indicates where the cursor is within the menu. •...
Page 35
OPERATION & USE Massage Mechanism Intensity Adjustment Feature available with all Programmed (excluding Full Body Air), Focused, and Manual massages The degree of pressure felt from the massage mechanism, can be adjusted between low, medium and high by pressing the 3D button on the remote or by adjusting intensity the menu settings of the selected massage. The default setting is medium.
Page 36
OPERATION & USE 4D Speed Adjustment Feature available with all Manual massages 4D Speed, or the speed at which the massage mechanism moves up and down the body, can be adjusted between Low, Medium and High within the menu settings of the selected massage. Note the default setting for 4D Speed is Medium. To adjust 4D Speed using the menu settings of the selected massage...
Page 37
• Brio Sport Preset Positions: The remote includes a button, Zero Gravity, that allows quick and easy movement into the preset Zero Gravity position, as well as the Restore/Upright position. To move the chair into these positions, press the Zero Gravity button located on the center of the remote.
Page 38
OPERATION & USE Roller Position Adjustment During Programmed & Focused Massages... Roller position cannot be adjusted after the scan is complete. During Manual Air Massages... If the roller is sitting in a position which is uncomfortable, you can adjust its location by using the up/down roller buttons to move the massage mechanism to your desired location.
Page 39
OPERATION & USE • A list of linkable massages will appear. Use the down/up navigation arrows to view the massages and press OK when the massage you wish to link is highlighted. • The title area of the remote will update to reflect that your massage has been linked. •...
Page 40
OPERATION & USE Removable Lower Back & Foot Buffer Pads • The chair comes with Foot Buffer pads in the accessory box. The foot buffer pads should be placed in the foot beds if the user finds the foot roller massage too intense. (See Figure X) •...
Page 41
OPERATION & USE Reading the Remote Home Screen Selected Program(s) Timer Foot Rollers Intensity/Speed/Width Selections Chromotherapy Coverage Selection Heat Zone Selection Scrolling Tip Text The selected program(s) names will appear in this place. The darkened bars indicate your selection. 1 bar = Low, Ultra Slow/Slow, Narrow 2 bars = Medium 3 bars = High, Fast, Wide The darkened word indicates your coverage selection.
Page 42
OPERATION & USE Language The remote can be set up to display in multiple languages. To change the Language setting, if not already there, press the Home/Menu button to access to the Main Menu. Then use the navigation arrows to navigate to Settings, scroll right to access Language options.
CARE & STORAGE Storage • After every use, turn off the main power switch located on the back of the chair and unplug the power cord from the wall outlet. • When not in use, the chair should always be stored in its full upright position (back rest fully inclined, foot rest to its lowest position).
If the chair still malfunctions or does not work, please turn off the main power switch and remove the power plug from the wall outlet. Contact Positive Posture for service. Do not dismantle or attempt to repair the chair yourself. Doing so will void the warranty.
Page 45
Then re-insert the power cord and turn on the main power switch. Turn on the chair using the remote’s power button. Continue use like normal. • If the problem persists, please contact Positive Posture service for further assistance.
Page 46
• If the chair does not, turn the power on with the remote power button, then turn the power off with the remote power button. The chair should return to its upright position. • If the problem persists, please contact Positive Posture service for further assistance. Problem: My remote screen is displaying a strange solid color.
Page 47
• Turn off the main power switch on the back left of the chair. • Unplug the power from the wall outlet. • Contact Positive Posture for assistance. Q: How do I make the massage stronger? A: Try any of the following things: •...
We’re confident that your new massage chair will provide you with many years of relaxation and trouble-free performance. Your Positive Posture massage chair comes with a 3-year limited warranty, and (for an additional fee) a five year extended warranty is also available. Our limited warranty includes on-site service covering all parts and labor in most locations in the United States and Canada.
SPECIFICATIONS Brio Sport Model Name PP7913A Model Number AC120V ~ 60Hz Power Supply 200W Power Consumption 30 minutes Rated Time From 11 times/minute to 35 times/minute Kneading Speed From 87 times/minute to 492 times/minute Tapping Speed From 54” (137 cm) per minute to 106” (269 cm) per minute Up/Down Speed 49”...
Page 50
Your massage chair was meticulously designed to conform to your specific comfort and relaxation needs. If you have questions about the operation of your massage chair, contact information for a Positive Posture chair expert can be found at www.PositivePosture.com. Positive Posture. A division of FFL Brands.
Need help?
Do you have a question about the Brio Sport and is the answer not in the manual?
Questions and answers