Safety - Samsung SPH-A660 User Manual

Getting the Most Out of Your Rectption
Keeping Tabs on Signal Strength
The quality of each call you make or receive depends on the signal
strength in your area. Your phone informs you of the current signal
strength by displaying a number of bars next to the signal strength icon.
The more bars displayed, the stronger the signal. If you're inside a
building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it yourself by
pressing any key. Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned
on, it receives and transmits radiofrequency (RF) signals. When you use
your phone, the system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital mode.
Knowing Radiofrequency Safety
The design of your PCS Phone complies with updated NCRP standards
described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE)
and the American National Standards Institute (ANSI) joined in
updating ANSI's 1982 standard for safety levels with respect to human
exposure to RF signals. More than 120 scientists, engineers and
physicians from universities, government health agencies and industries
developed this updated standard after reviewing the available body of
research. In 1993, the Federal Communications Commission (FCC)
adopted this updated standard in a regulation. In August 1996, the FCC
adopted hybrid standard consisting of the existing ANSI/IEEE standard
and the guidelines published by the National Council of Radiation
Protection and Measurements (NCRP).
Section 4: Safety Guidelines and Warranty Information
4A: Safety
Maintaining Your Phone's Peak Performance
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
Hold the phone with the antenna raised, fully-extended, and over your
‹
shoulder.
Try not to hold, bend, or twist the phone's antenna.
‹
Don't use the phone if the antenna is damaged.
‹
Speak directly into the mouthpiece.
‹
Avoid exposing your phone and accessories to rain or liquid spills. If
‹
your phone does get wet, immediately turn the power off and remove
the battery. If it's inoperable, return it to a Sprint Store or call PCS
Customer SolutionsSM for service.
Note: For the best care of your phone, only Sprint authorized personnel
should service your phone and accessories. Faulty service may void the
warranty.
Maintaining Safe Use of and Access to
Your Phone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without a
hands-free device) is prohibited in some jurisdictions. Laws vary as to
specific restrictions. Remember that safety always comes first.
When using your phone in the car:
Get to know your phone and its features, such as speed dial and redial.
‹
When available, use a hands-free device.
‹
Position your phone within easy reach.
‹
Let the person you are speaking to know you are driving; if necessary,
‹
suspend the call in heavy traffic or hazardous weather conditions.
Do not take notes or look up phone numbers while driving.
‹
Dial sensibly and assess the traffic; if possible, place calls when
‹
stationary or before pulling into traffic.
Section 4: Safety Guidelines and Warranty Information
132
4A: Safety
133