Enabling/Disabling Digit Dial Choice Lists; Adapting Digit Dial - Samsung SPH-A660 User Manual

"The phone recognizes the digits one, two, three, four, five, six, seven,
‹
eight, nine, zero, and oh. The phone does not recognize numbers such
as "one eight hundred" for "1-800." Instead, say "one-eight-zero-
zero."
"The phone recognizes only valid 7 or 10 digit North American phone
‹
numbers.
"If your phone does not usually recognize you correctly when you are
‹
using Digit Dial, try adapting Digit Dial to your voice, which can
significantly improve accuracy for some speakers. See the section
"Adapting Digit Dial" for details.
To place a call using Digit Dial:
Activate voice recognition by pressing the navigation key left. The
1.
phone prompts you for a command.
Say Digit Dial. The phone prompts you to say the number.
2.
Say a valid 7 or 10 digit North American phone number naturally
3.
and clearly.
Note:
If desired, you can say the number "1" before the number. This is not
required, the call is made both ways.
If the phone asks you, "Did You Say," followed by the correct number,
4.
say "Yes." You can also select the correct number from those
displayed on the screen by pressing
phone will then dial the number.
If the phone asks you, "Did You Say," followed by an incorrect
5.
number, say "No." If there are other alternatives, the phone will
prompt you with the next one. You can also press the navigation key
up or down to select the correct number from the Choice List, and
then press to dial.
Note:
In some cases, the phone might ask you to repeat a number. Make
sure that the number is a valid 7 or 10 digit North American phone number,
and then say the number again. If the number isn't valid, or if the phone
still doesn't understand the number on the second try, it will not place a
call.
Section 2: Understanding Your PCS Phone
2I: Using Your Phone's Voice Services
on the correct number. The
82

Enabling/Disabling Digit Dial Choice Lists

You can customize whether the Digit Dial feature displays the list of top
voice recognition choices or automatically dials the first number, without
displaying a choice list.
To enable or disable choice lists for Digit Dial:
Press for Settings.
1.
Press for Voice Dial.
2.
Press for Choice List.
3.
Press for Digit Dial.
4.
Press the navigation key up or down to select Yes or No and press
5.
.

Adapting Digit Dial

Digit Dial works well for most people without any special adaptation.
However, if you speak with a strong accent or unique voice, you may
obtain better results by adapting the system to better match your voice.
After you adapt Digit Dial, your phone will be customized to your voice.
Other people will not be able to use Digit Dial on your phone unless they
reset the phone to factory defaults.
Important:
ONLY adapt Digit Dial if the system is frequently misrecognizing
your speech. You can always restore the system to its original factory
setting. Adaptation involves recording several digit sequences to teach
the system your voice. The adaptation process takes about 3 minutes.
Tips for adapting Digit Dial:
Adapt digits in a quiet place.
‹
Make sure you wait for the beep before starting to speak.
‹
Speak clearly, and say each digit distinctly.
‹
If you make a mistake while recording a sequence of digits, or if there
‹
is an unexpected noise that spoils the recording, re-record that
sequence.
Section 2: Understanding Your PCS Phone
2I: Using Your Phone's Voice Services
83