Using Name Dial - Samsung SPH-A660 User Manual

Hide thumbs Also See for SPH-A660:
Table of Contents

Advertisement

To adapt Digit Dial to your voice:
Press
for Settings.
1.
Press
for Voice Dial.
2.
Press
for Adapt Digits.
3.
The phone displays the first digit sequence. When you are ready to
4.
start recording, press
. The phone prompts you to say the first
sequence of digits.
Wait for the beep, and then repeat the digits using a normal tone of
5.
voice. The phone plays back your recording and asks you if the
recording sounds "OK."
If the recording sounds ok (no mistakes, and no background noises),
6.
say "Yes." If you need to re-record the digits to fix any problems, say
"No." The phone then prompts you to say the digits again. Wait for
the beep, and then record the digits again. Repeat this step until you
are satisfied with the recording.
After confirming that the recording sounds ok, repeat the recording
7.
process with the next set of digits. After six sets of digits, the phone
will ask you whether you want to do more adaptation. Answer "Yes."
Repeat steps 4-8 for another six sets of digits. After the sixth set of
8.
digits, the phone indicates that adaptation is complete.
Resetting Digit Dial Adaptation
To erase any adaptation and reset Digit Dial to its original state:
Press
for Settings.
1.
Press
for Voice Dial.
2.
Press
for Reset Digits.
3.
Highlight Yes using the navigation key and press
4.
Section 2: Understanding Your PCS Phone
2I: Using Your Phone's Voice Services
.
Section 2: Understanding Your PCS Phone
84
2I: Using Your Phone's Voice Services

Using Name Dial

Name Dial automatically voice-actives every contact in your Phonebook
without the need to record or "train" names before using them. With
Name Dial you can dial any person in your Phonebook by saying that
person's name.
To place a call using Name Dial:
Activate voice recognition by pressing the navigation key left. The
1.
phone prompts you for a command.
Say Name Dial. The phone prompts you to say a name.
2.
Say the full name of the person you want to call, exactly as it is
3.
entered in your Phonebook. The phone plays the name through the
earpiece and displays it on the screen. If the Phonebook contains
only one number for the name, the phone automatically dials that
number.
If the name that you spoke has more than one number associated
4.
with it, the phone displays the different locations (home, work, etc.)
and asks you which one to dial. Say one of the following locations:
•Home
•Work
•Mobile
•Pager
•Fax
The phone dials the number for the location you specified.
5.
85

Advertisement

Table of Contents
loading

Table of Contents