Related Manuals for rtd USB25407
Summary of Contents for rtd USB25407
- Page 1 USB25407 and USB35407 PCI Express USB 3.0 User’s Manual BDM-610020101 Rev. B RTD Embedded Technologies, Inc. AS9100 and ISO 9001 Certified...
- Page 2 RTD Embedded Technologies, Inc. 103 Innovation Boulevard State College, PA 16803 USA Telephone: 814-234-8087 Fax: 814-234-5218 www.rtd.com sales@rtd.com techsupport@rtd.com...
- Page 3 Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.
-
Page 4: Table Of Contents
CN4, CN5, CN6 and CN7: USB 3.0 Type A Connectors 3.3.2 Bus Connectors CN1 (Top) & CN2 (Bottom): PCIe Connector CN16: PCI Connector (USB25407 only) Steps for Installing ..................................11 IDAN Connections Module Handling Precautions ..............................12 Physical Characteristics ................................12 Connectors.................................... - Page 5 Figure 3: Example 104™Stack ....................................11 Figure 4: IDAN Dimensions ....................................12 Figure 5: Example IDAN System .................................... 14 Figure 6: USB25407 Block Diagram ..................................15 Table of Tables Table 1: Ordering Options ......................................6 Table 2: Operating Conditions ....................................8 Table 3: Electrical Characteristics ....................................
-
Page 6: Introduction
Product Overview The USB25407/USB35407 is a four port USB 3.0 controller. This module provide the latest in high-speed connectivity with transfer rates up to 5 Gbps. Advanced connectivity opens the door to high resolution and high frame rates for USB cameras. It also allows USB hard drives to perform as well as SATA hard drives. -
Page 7: Contact Information
If you are having problems with your system, please try the steps in the Troubleshooting section of this manual. For help with this product, or any other product made by RTD, you can contact RTD Embedded Technologies technical support via the... -
Page 8: Specifications
Current Limit per port PORT PCIe Bus Differential Output Voltage DC Differential TX Impedance 95.2 116.9 Ω Differential Input Voltage 0.175 DC Differential RX Impedance 92.7 115.8 Ω Electrical Idle Detect Threshold | www.rtd.com USB25407 and USB35407 User’s Manual RTD Embedded Technologies, Inc. -
Page 9: Board Connection
When removing it from the bag, hold the board at the edges, and do not touch the components or connectors. Handle the board in an antistatic environment, and use a grounded workbench for testing and handling of your hardware. Physical Characteristics STEP model is available upon request; contact RTD Tech Support for more information. • Weight: Approximately 0.07 kg (0.16 lbs.) •... -
Page 10: Connectors And Jumpers
The PCIe connector is the connection to the system CPU. The position and pin assignments are compliant with the PCI/104-Express Specification. (See PC/104 Specifications on page 17) The USB25407 is a “Universal” board, and can connect to either a Type 1 or Type 2 PCIe/104 connector. CN16: PCI Connector (USB25407 only) The PCI connector is pass-through. -
Page 11: Steps For Installing
11. Re-connect the power cord and apply power to the stack. 12. Boot the system and verify that all of the hardware is working properly. Figure 3: Example 104™Stack | www.rtd.com USB25407 and USB35407 User’s Manual RTD Embedded Technologies, Inc. -
Page 12: Idan Connections
Weight: Approximately 0.21 Kg (0.46 lbs.) • Dimensions: 151.972 mm L x 129.978 mm W x 16.993 mm H (5.983 in L x 5.117 in W x 0.669 in H) Figure 4: IDAN Dimensions | www.rtd.com USB25407 and USB35407 User’s Manual RTD Embedded Technologies, Inc. -
Page 13: Connectors
The PCIe connector is the connection to the system CPU. The position and pin assignments are compliant with the PCI/104-Express Specification. (See PC/104 Specifications on page 17) The USB25407 is a “Universal” board, and can connect to either a Type 1 or Type 2 PCIe/104 connector. CN16: PCI Connector (USB25407 only) The PCI connector is pass-through. -
Page 14: Steps For Installing
11. Re-connect the power cord and apply power to the stack. 12. Boot the system and verify that all of the hardware is working properly. Figure 5: Example IDAN System | www.rtd.com USB25407 and USB35407 User’s Manual RTD Embedded Technologies, Inc. -
Page 15: Functional Description
PCI Express Repopulation The USB25407 provides a PCI Express packet switch to repopulate the lane that it uses. The uplink for the switch is attached to the host through the PCIe/104 bus. One of the downlinks is attached to the USB 3.0 controller. The other downlink is fed back to the PCIe/104 bus, and provides connectivity to the fourth card in the stack from the USB25407. -
Page 16: Troubleshooting
If problems persist, or you have questions about configuring this product, contact RTD Embedded Technologies via the following methods: Phone: +1-814-234-8087 E-Mail: techsupport@rtd.com Be sure to check the RTD web site (http://www.rtd.com) frequently for product updates, including newer versions of the board manual and application software. | www.rtd.com USB25407 and USB35407 User’s Manual RTD Embedded Technologies, Inc. -
Page 17: Additional Information
A copy of the latest PC/104 specifications can be found on the webpage for the PC/104 Embedded Consortium: www.pc104.org PCI Express Specification A copy of the latest PCI Express specifications can be found on the webpage for the PCI Special Interest Group: www.pcisig.com | www.rtd.com USB25407 and USB35407 User’s Manual RTD Embedded Technologies, Inc. -
Page 18: Limited Warranty
During the one year warranty period, RTD Embedded Technologies will repair or replace, at its option, any defective products or parts at no additional charge, provided that the product is returned, shipping prepaid, to RTD Embedded Technologies. All replaced parts and products become the property of RTD Embedded Technologies. - Page 19 RTD Embedded Technologies, Inc. 103 Innovation Boulevard State College, PA 16803 USA Telephone: 814-234-8087 Fax: 814-234-5218 www.rtd.com sales@rtd.com techsupport@rtd.com Copyright 2017 by RTD Embedded Technologies, Inc. All rights reserved.
Need help?
Do you have a question about the USB25407 and is the answer not in the manual?
Questions and answers