Mercedes-Benz GLE 2018 Supplement To The Owner's Manual page 22

20
Changes as compared to the Owner's Manual
Securely fasten the attachment clip, which is
#
part of the upper anchorage strap, to the
upper anchor fitting 3.
Fold down cover 2 of upper anchorage
#
point 3.
Move head restraint 1 back down again
#
slightly if necessary. Make sure that you do
not interfere with the correct routing of
upper anchorage strap.
S-Class Cabriolet
The upper anchorage points are fitted in the
outer rear seats behind a cover.
Push down and remove cover 1.
#
Securely fasten the attachment clip 3,
#
which is part of the upper anchorage strap,
to the upper anchor fitting 2.
Insert cover 1.
#
GLS
The upper anchorage points for the second row
of seats are located on the rear of the rear seat
backrests. For the third row of seats, use the
upper anchorage point in the luggage compart-
ment floor.
Move head restraint 3 upwards.
#
For an upper anchorage strap with one belt
#
strap, route the upper anchorage strap under
the head restraint 3 between the two head
restraint bars.
For an upper anchorage strap with two belt
#
straps, route the upper anchorage strap on
the left and right past the side of the head
restraint 3.