Mercedes-Benz GLE 2018 Supplement To The Owner's Manual page 18

16
Changes as compared to the Owner's Manual
Move head restraint 1 upwards.
#
Remove combined luggage cover and net 3.
#
For an upper anchorage strap with one belt
#
strap, route the upper anchorage strap under
the head restraint 1 between the two head
restraint bars.
For an upper anchorage strap with two belt
#
straps, route the upper anchorage strap on
the left and right past the side of the head
restraint 1.
Securely fasten the attachment clip, which is
#
part of the upper anchorage strap, to the
upper anchor fitting 4 on the back of the
rear seat backrest 2.
Tension upper anchorage strap. Comply with
#
the manufacturer's installation instructions
when doing so.
Make sure that upper anchorage strap is not
#
twisted.
Move head restraint 1 back down again
#
slightly if necessary. Make sure that you do
not interfere with the correct routing of
upper anchorage strap.
Replace combined luggage cover 3.
#
E-Class Coupé
The upper anchorage points are installed in the
rear compartment behind the head restraints on
the parcel shelf.
Move head restraint 1 upwards.
#
Fold up cover 2 of upper anchorage point
#
3.
Guide upper anchorage strap under head
#
restraint 1 between the two head restraint
rods.