Table of Contents
Advertisement
3 – PRODUCT PRESENTATION
Microcomputer
The watermaker group is composed by the following components:
•
Reverse osmosis membranes
•
Energy Recovery System
•
Manometer
•
Flowmeter
•
Depressurization valve
•
Positioner
•
Reset valve
•
Probe (pressure switch)
•
Electric box
Reverse osmosis membranes, are installed inside the glass fibre high-pressure housing. Membranes are
n.3 x SW2521 type. Their purpose is to separate the intake high-pressure seawater in two flows: one for the
salt-water drain and one for the fresh water production.
THE PRESENT MANUAL BELONGS TO -
WATERMAKER GROUP (BACK VIEW)
CONCENTRATE OUTLET (OUT) AND SEAWATER INLET (IN)
FIG. 3-8
Signal pressure switch
FIG. 3-9
Schenker Italia
- ALL RIGHTS RESERVED
16
COD.
60M12/24.A.2018
EN
Advertisement
Table of Contents
