Related Manuals for JDW EQ747
Summary of Contents for JDW EQ747
-
Page 1: Assembly Instructions
Cordless Hedge Trimmer (EQ747) Assembly Instructions Please Read All Instructions Thoroughly Before Starting Assembly... - Page 2 Components 1) Blade 2) Protector 3) Locked front handle 4) Front switch-handle 5) Back switch-handle 6) Battery pack...
-
Page 3: Safety Instructions
Safety Instructions General Safety Instructions WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery pack-operated (cordless) power tool. - Page 4 Plug Fitting Note: The product is fitted with a standard UK mains outlet 3 pin plug. If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket.
- Page 5 Personal Saftey Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or med- ication. A moment of inattention while operating power tools may result in serious personal injury.
- Page 6 Personal Saftey X Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. X Keep cutting parts sharp and clean.
- Page 7 Personal Saftey X Read the instructions carefully. Be familiar with the controls and the proper use of the appliance. X Never allow children to use the product. X Never allow people unfamiliar with these instructions to use the appliance. Local regula- tions may restrict the age of the operator.
-
Page 8: Operation
Operation Walk, never run. Keep all ventilation openings clear of debris. Never blow debris in the direction of bystanders. Maintenance and storage 1). Keep all nuts, bolts and screws tight to be sure the product is in safe working condition. 2). - Page 9 Emergency Vibration and noise reduction To reduce the impact of noise and vibration emission, limit the time of operation, use low- vibration and low-noise operating modes as well as wear personal protective equipment. Emergency Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter.
- Page 10 Saftey Warnings & Instructions Safety Warnings and Instructions: Charging 1. This manual contains important safety and operating instructions. 2. Before using battery charger, read all instructions and cautionary warnings on battery charger and product using battery. CAUTION: To reduce the risk of injury, use this charger only with this product.
-
Page 11: Technical Specifications
Saftey Warnings & Instructions 8. Use only the supplied charger when charging your tool. The use of any other charger could damage the tool or create a hazardous condition. 9. Use only one charger when charging. 10. Do not attempt to open the charger. There are no customer serviceable parts inside. Return to any authorized Black &... -
Page 12: Charging Procedure
Charging Procedure With this symbol the manufacturer confirms that this power tool is in accordance with applicable European directives. Do not expose to rain Be careful! Wear personal protective equipment. Always wear safety glasses or a face shield, hearing protection and safety helmet. Sharp blade can cut limbs Wear gloves for cutting protection. -
Page 13: Important Charging Notes
Charging Procedure Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. For longest battery life, do not discharge batteries fully. It is recommended that the batteries be recharged after each use. WARNING: Fire Hazard. When unplug the output plug from the charging hole, be sure to unplug the charger from the outlet first, then disconnect the charger output plug from the charging hole. - Page 14 Operation Instructions 4) If the batteries do not charge properly—(1) Check current at receptacle by plugging in a lamp or other appliance. (2) Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights. (3) Move charger and tool to a surrounding air temperature of 40°F (4.5°C) to 105°F (+40.5°C).
- Page 15 Operation Instructions The appliance is designed for use by adults. Young people over 16 years old may use the appliance under supervision only. This appliance is not intended for use by persons (including children)with reduced physical, sensory or mental capabilities ,unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
-
Page 16: General Information
General Information General information If older hedges need to be cut back a substantial amount, use pruning shears to trim thicker branches to the desired length before going to work with the hedge trimmer. Ensure that the blade does not come into contact with anything that could damage it, such as fencing wire or metal plant supports. - Page 17 Please Retain Instructions For Future Use J.D. WILLIAMS & CO. LTD 40 LEVER STREET, MANCHESTER, UK, M60 6ES...
Need help?
Do you have a question about the EQ747 and is the answer not in the manual?
Questions and answers