Hover-1 Beast Buggy Operation Manual page 18

RIDING YOUR HOVER-1 BEAST BUGGY
Ensure your Hover-1 Beast Buggy is fully assembled and correctly installed onto your scooter with all straps and
screws secured in place. Ensure your scooter is properly maintained as well. Failure to do so may result in
serious bodily harm or death and damage to the unit.
After reviewing the pre-ride checklist, follow the steps below to begin riding your Hover-1 Beast Buggy.
1. Turn on your scooter.
2. Sit comfortably in the Hover-1 Beast Buggy seat.
2. Place your feet onto the foot rests.
3. Firmly grip both handle bars and slowly push them downward simultaneously to move forward.
4. When riding, slowly pull both handle bars upwards simultaneously to brake.
5. To reverse, slowly pull both handle bars upwards simultaneously.
6. To turn left, push the right handle bar down while holding the left handle bar in neutral position.
7. To turn right, push the left handle bar down while holding the right handle bar in neutral position.
17