Hover-1 Beast Buggy Operation Manual page 11

2. Using two hook and loop elastic straps, place the hook and loop side of strap downward and then pull
each strap through the holes on back of each pedal mount. Pull the straps all the way through until the
plastic tting meets the pedal mount. Keep the four extra hook and loop elastic staps for replacement parts.
Plastic Hook and
Fitting Loop strap
3. Wrap each hook and loop strap under your self-balancing scooter and pull the loose ends through the
holes on front of each pedal mount. Make sure your scooter is secured by tightening and fastening the hook
side to the loop side of each strap.
hook side
Loop side
10