Status Check Mode - Toshiba 37AV500P Service Manual

--NG : A/D adjustment set incorrect.
-- : A/D adjustment is not needed. Because its picture format isn't used.
(6) RF AGC adjustment value
RF Adjustment Value is shown.
(7) Model Name
Model name information (ascii code). : Display 7 byte data.
(8) LCD Panel Vendor information display
The following Panel Vendor (DDD) and screen size (00) are displayed.
Example : IPS-32 indicates that Vendor is IPS and Screen Size is 32 inch

Status Check Mode

1. Press "9" button thrice on remote control during display of adjustment menu in the
service mode.
The status of this model will be checked.
2. During Status Check, the following displays are shown.
* Status check display and Item are subject to the models.
(1) MAIN :
Main source information :
Display RF position number (0 - 99) on the main screen, or Input Source
(EXT1/2/3/HDMI etc.)
(2) MAIN FORMAT :