Setting Data Of Signal Unit - Toshiba 37AV500P Service Manual

Setting Data of Signal Unit

After replacing Main board, the following initialization is required.
CAUTION: Whenever using new Main board to the set, setting the PANEL
data according to Panel option data.
Note:
In case initialization by setting wrong PANEL is done, there is a possibility of abnormal
display.
1) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the owner's manual.
PANEL (HEX) Model name Panel vendor
0x01 or 0x04 32AV500P IPS(old) or IPS(new)
0x02 or 0x05 37AV500P IPS(old) or IPS(new)
0x03 or 0x06 42AV500P LGD(old) or LGD(new)
Initializing Data setting flowchart after replacing the Signal Unit