Selecting The Adjusting Item; Setting & Adjusting Data; Adjusting Items And Data In The Service Mode - Toshiba 37AV500P Service Manual

Test signal selection
Selection of the adjustment items
Change of the data value
Adjustment menu mode ON/OFF
"RCUT" selection
"GCUT" selection
"BCUT" selection
"CNTX" selection
"COLC" selection
"TNTC" selection
Automatic A/D Adjustment
(PC, Component, Composite (PAL, NTSC))
Self diagnostic display ON/OFF

Selecting the Adjusting Item

Every pressing of CH button in the service mode changes the adjustment items in the
order of table below. ( button for reverse order)
SETTING & ADJUSTING DATA
[ SERVICE MODE ]

ADJUSTING ITEMS AND DATA IN THE SERVICE MODE:

Note:
The image system data of RCUT-BDRV is different by each image format.
The PAL value is indicated in the table.
Never adjust H.POS and V.POS except PAL/WIDE mode.
Item Name of adjustment
RCUT R CUT OFF
CH (on TV or remote control)
Volume +/- (on TV or remote control)
MENU button (on TV)
1 button
2 button
3 button
4 button
5 button
6 button
7 button
9 button