Charging The Battery Pack - Samsung VP-MX20C User Manual

Charging the Battery Pack

• Be sure to charge the battery pack before you start using your memory camcorder.
Use IA-BP85ST battery pack only.
•
The battery pack may be charged a little at the time of purchase.
•
1. Slide the POWER switch downward
to turn off the power.
2. Open the LCD screen and insert the
battery pack to the memory camcorder.
page 14
3. Open the DC IN/USB/AV jack cover.
4. Connect the AC power adaptor to the
DC IN jack of your memory camcorder.
5. Connect the AC power adaptor to a
wall socket.
The CHG (charging) indicator lights
•
up in orange and showing that the
battery pack is charging.
The CHG (charging) indicator lights
•
up in green when the battery is fully
charged. page 16
6. When the battery pack is fully charged, disconnect the AC power adaptor from the memory camcorder.
• Even with the power switched off, the battery pack will still discharge if it is left attached to the memory camcorder.
It is recommended that you remove the battery pack from the memory camcorder.
You can also charge with the cradle.
5
page 13
1
2
4
English_15