GE PBT650 Series Owner's Manual page 8

Getting started
Start Dishwasher
Start Press the Start button and close the door within 4 seconds to start the cycle or begin the Delay
Hours countdown. The wash cycle will begin shortly after closing the door. The display will turn
off if the door remains open for two minutes. To activate the display, close and open the door or
press any button.
Interrupt To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
or Pause cycle to pause. To restart or resume the cycle, press Start Cancel, and close the door within
4 seconds.
Cancel To cancel a wash cycle, press and hold the Start Cancel button for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
Cycle Indicator Lights and Sounds (on PBT650 and PBT660 models)
Located on the right side of the front of the dishwasher, these lights indicate how far along is the current wash
cycle when the dishwasher is operation.
1
WASH
DRY
2
CLEAN
3
Cycle Indicator Lights and Sounds (on PBT860 models)
WASH
1
RINSE
2
DRY
3
CLEAN
4
Sanitized Indicator If the sanitize cycle was selected, sanitized indicator will be turn on at the end of the
cycle, if the NSF requirements for sanitization are not reached. The light will not turn on. Certified residential
dishwashers are not intended for licensed food establishments.
The sanitize cycle is NSF certified.
8
1 2 3
When the dishwasher is in a wash or rinse portion of a cycle, the Wash lights are
illuminated.
When the dishwasher is in a drying portion of a cycle, the Wash and Dry lights are
illuminated.
After the dishwasher has completed all portions of a cycle, all indicator lights are
illuminated. If you open the door when the Clean lights are illuminated, they will turn off
immediately.
1
When the dishwasher is in a wash portion of a cycle, the Wash light is illuminated.
When the dishwasher is in a rinse portion of a cycle, the Rinse light is illuminated.
When the dishwasher is in a drying portion of a cycle, the Dry light is illuminated.
After the dishwasher has completed all portions of a cycle, all other indicator lights are
turned off and the Clean light is illuminated for 10 minutes. If you open the door when the
Clean light is illuminated, it turns off immediately.
2 3 4
29-5953-2