PRESONUS StudioLive 24R Networking Manual page 15

2 AVB Networking
2.7 Clocking
StudioLive Series III Mixers (Standalone Mode)
i
AVB Inputs Stagebox Setup
StudioLive 24R
Name: StudioLive 24R
NSB 8.8
Preamp Permissions: StudioLive 24
Mode: Monitor Mixer
Stand-alone
Monitor Mixer
Stagebox
Apply
Stand-alone
A B
FX FX
FX C FX D
EFFECTS MASTER MASTER CONTROL
Sample Rate: Permissions User Button Assgins
Network Stream
48 kHz
Network Clock:
Network Stream
Fat Ch Load/Paste Firmware
Internal
Show Peak Hold:
Off
Network Stream
LED:
Link Aux Mutes Bluetooth Reg.
Low Med High
Backlight:
Low High
A B
FX FX
FX C FX D
In applications where two or more mixers are on a network, functioning
independently, but configured to send and received streams to and from other AVB
nodes on the network, you must designate one mixer as the clock master.
To do this, simply set all other mixers to receive clock from the Network
Stream and be sure a stream is routed to the first AVB stream of each mixer
from the master mixer. Be sure to leave one mixer on its Internal clock.
On a StudioLive Series III console mixer, configuring external clocking can be done
from the System Menu located on the Home Screen.
On all StudioLive Series III mixers (rack or console), configuring external clocking can
be done from the Device Settings Menu in UC Surface.
StudioLive™ Series III
AVB Networking Guide
12