Dse In Player Mode; Maintenance; Cleaning And Careing For Your Camcorder; Cleaning The Viewfinder - Samsung VP-L700U Owner's Instruction Book

Playing back the Tape

DSE in PLAYER mode

The procedure for using DSE in PLAYER mode is the same as the procedure for using DSE in CAMERA mode,
except that the power switch must be set to PLAYER instead of CAMERA. Please refer to pages 40 and 41.
Note: The GHOST, STROBE, NEG., MIRROR, MOSAIC, CINEMA and 16:9(WIDE) effects will not operate when your
camcorder is in PLAYER mode.
Pressing the DSE button will scroll through the available settings. Stop at the one you require.

Maintenance

Cleaning and Careing for your Camcorder

Cleaning the Viewfinder

Releasing the Eyepiece
1. Pull the viewfinder up and turn the screw counter- clock-wise.
2. Pull the eyepiece away from the viewfinder.
3. Clean the Eyepiece and the VIEWFINDER screen with
a soft cloth and cotton swab or a blower.
Reattaching the Eyepiece
4. Replace the Eyepiece on the VIEWFINDER.
5. Replace and tighten the screw.

Cleaning the LCD panel

Open the LCD display panel and wipe it gently with a soft cloth.
Be careful not to damage the display.
ENGLISH
57