Table of Contents
Advertisement
Playing back the Tape
DSE in PLAYER mode
The procedure for using DSE in PLAYER mode is the same as the procedure for using DSE in
CAMERA mode, except that the power switch must be set to PLAYER instead of CAMERA.
Please refer to pages 36 and 37.
Note:
The GHOST, STROBE, NEG., MIRROR, MOSAIC, CINEMA and WIDE (16:9) effects will not
operate when your camcorder is in PLAYER mode.
Pressing the DSE button will scroll through the available settings.
Stop at the one you require.
Maintenance
Cleaning and Taking care of the Camcorder
Cleaning the Viewfinder
Releasing the Eyepiece
1. Pull the viewfinder up and then turn the screw counter-
clock-wise.
2. Pull the EYEPIECE away from the viewfinder.
3. Clean the EYEPIECE and the VIEWFINDER screen
with a soft cloth and cotton swab or a blower.
Reattaching the Eyepiece
4. Reposition the EYEPIECE back on the VIEWFINDER.
5. Insert and tighten the screw.
1
3
ENGLISH
2
4
53
Advertisement
Table of Contents
