Samsung VP-L700U Owner's Instruction Book page 13

Getting to Know Your Camcorder
OSD (On Screen Display)
j. Time (see page 42)
Shows the time the recording was made.
k. Title (see page 44)
Shows the title of the recording. It is superimposed on the scene.
l. Self diagnosis (see page 64)
(TAPE!, TAPE END!,
PROTECTION!
m. DSE (Digital Special Effect) (see page 40)
Indicates the DSE mode is activating.
The operation modes are GHOST, STROBE, SEPIA, B&W, NEG., MIRROR, ART, MOSAIC, 16:9(WIDE) and CINEMA.
n. White Balance mode (see page 49)
Indicates the White Balance mode is activating.
The White Balance modes are AUTO, INDOOR
o. Tape counter
Indicates amount of the tape used.
p. Operation mode
Indicates the operation mode is activating.
The operation modes are STBY, REC , STOP, PLAY
q. Hi8 (VP-L700/L710/L750/L750D/L770 only) (see page 54)
Indicates the use of the Hi8 tape in CAMERA or PLAYER modes.
In case of not being tape, display Hi8 on the screen in CAMERA or PLAYER modes.
r. DEW condensation (see page 67)
( )
Monitors the moisture condensation.
s. Digital zoom (see page 31)
Indicates the digital zoom is active.
t. Snap Shot (VP-L750/L750D/L770 only) (see page 48)
Shows the remaining available space for Snap Shots.
u. Z.RTN (VP-L710/L750/L750D/L770 only) (see page 55)
Shows when the zero return is acivated.
v. PB DSE (see page 57)
Shows that the PB DSE mode is active.
w. VOLUME (see page 56)
x. EASY & CUSTOM
Shows when the easy or custom mode is active.
y. LIGHT (VP-L750/L750D/L770 only)
Shows when the Light is switched on.
z. Remocon ( OFF) (
Indicates the remocon off mode is activated.
) Checks the operation of the Camcorder.
(
VP-L710/L750/L750D/L770
and OUTDOOR .
) ( )
, FF , REW
( ) ( ) (
only)
ENGLISH
, EJECT.
)
13