APW Wyott ICT-18A Installation & Operating Instructions Manual

Tabletop induction cooking unit

Advertisement

Quick Links

DESIGNED SMART. BUILT SOLID.
®
INSTALLATION AND OPERATING INSTRUCTIONS
Tabletop Induction Cooking Unit
Model: ICT-18A
INTENDED FOR OTHER THAN HOUSEHOLD USE
P/N xxxxx 09/18
APW Wyott Food Service Equipment Company
1307 N. Watters Road, Suite 180 • Allen, TX 75013
APW Wyott Food Service Equipment Company is a wholly owned subsidiary of Standex International Corporation.
972.908.6100 Phone
+1.800.527.2100
214.565.0976 Fax
www.apwwyott.com
1

Advertisement

Table of Contents
loading

Summary of Contents for APW Wyott ICT-18A

  • Page 1 INTENDED FOR OTHER THAN HOUSEHOLD USE P/N xxxxx 09/18 APW Wyott Food Service Equipment Company 1307 N. Watters Road, Suite 180 • Allen, TX 75013 APW Wyott Food Service Equipment Company is a wholly owned subsidiary of Standex International Corporation. 972.908.6100 Phone +1.800.527.2100 214.565.0976 Fax...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS ITEM PAGE ITEM PAGE How Does Your Induction Work ... 2 Cause of Overheating ....5 Precautions .
  • Page 3: Safety Devices

    surface of the ceramic hot! 4. DO NOT cook with empty pots or pans. Heating an empty pan will automatically activate the overheating protection device and the unit will shut off. 5. Place the induction unit on a flat & even surface and at least 10cm away from the wall and other objects for proper ventilation.
  • Page 4: Suitable Pots And Pans

    SUITABLE USTENSILS- FOR INDUCTION HEATING PLATES Suitable Pots 1. Iron 2. Cast iron 3. Stainless steel 4. Enamelware All pots and pans must have a magnetic bottom. All pots and pans must have a flat bottom. All pots and pans should have a diameter between 12cm (4 3/4”) and 24cm (10”). FIGURE 1A FIGURE 1B FIGURE 1C...
  • Page 5: Operation Instructions

    OPERATION INSTRUCTION 1. Ensure that the electrical supply matches with the electrical specifications on the dataplate located on the under side of the unit. 2. Place suitable pan on the center of the ceramic top. 3. Press power ON/OFF key, heating lamp will light and LED power level will be displayed. 4.
  • Page 6: Control Panel

    CONTROL PANEL HEAT HEATING HOLD 220°C 430°F HOLD HEAT 1. Power On/ Off Key. 2. “Heating” indicator light. 3. “Heat” function indicator light. 4. “HOLD”(Holding Temperature) function indicator light. 5. “HOLD”(Holding Temperature) function key. 6. “Heat” function key. 7. Power Level / Holding Temperature display LED lights. 8.
  • Page 7 1800 watt Induction Heating Zone Ceramic Top Plate Stainless Steel Housing Air-Intake Air-Outlet Power On/Off Key Induction Heating Indicator Light Hold Function Key Heat Function Key. 10. “Heat/Hold” Function Indicator Light 11. LED Power Display 12. Power Control Knob. (Power regulator)
  • Page 8: Troubleshooting

    TROUBLESHOOTING 1. If your induction range seems to be working improperly, it doesn’t necessarily mean it’s defective. In all cases, check the following points. The Problem The Probable Cause No indication light when power “on” Cable/terminal block is loose Broken circuit of fuse; or automatic switch in the power supply No Power supply Heating indicator does not light, or is Unsuitable cooking utensil...
  • Page 9 IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment. For Warranty Service and/or Parts, this information is required. Model Number Serial Number Date Purchased Notes...
  • Page 10: Warranty

    Authorized Service Agencies. The use of other than APW Wyott Authorized Service Agencies will void this warranty and APW Wyott will not be responsible for such work or any charges associated with same. The closest APW Wyott Authorized Service Agent must be used.

Table of Contents