Safety Devices - APW Wyott ICT-18A Installation & Operating Instructions Manual

Tabletop induction cooking unit
Table of Contents

Advertisement

surface of the ceramic hot!
4. DO NOT cook with empty pots or pans. Heating an empty pan will automatically activate the
overheating protection device and the unit will shut off.
5. Place the induction unit on a flat & even surface and at least 10cm away from the wall and other
objects for proper ventilation.
6. DO NOT place any objects or tools in the air-intake panel. Doing so may cause electrical shock.
7. To protect against electrical shock, DO NOT immerse the unit, the cord or the plug in or near water
or other liquids.
8. Close supervision is necessary when the induction unit is used or near children.
9. DO NOT operate the induction unit if it has been damaged in any manner or if the unit malfunctions.
Return the unit to the nearest authorized service facility for examination or repair.
10. The use of any accessories or parts not recommended by the manufacturer may cause injuries.
11. Keep the power cord away from heat.
12. DO NOT place the induction unit in, on, or near open flames, electric burners, heated ovens or
other high temperature surroundings.
13. DO NOT heat any sealed cans on the induction unit. A heated can may explode.
14. DO NOT move the induction unit while cooking or when the pan is hot.
15. After the induction unit has cooled down, unplug the cord and clean as follows, CERAMIC PLATE:
wipe with damp cloth or use a mild, non-abrasive cleaning solution. BODY: wipe the control panel
with soft cloth or use a mild cleaner.
16. DO NOT use induction unit for other than intended use.
17. Unplug when not in use.
18. When storing, DO NOT place any objects on top of the induction unit.
19. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Note: Save these instructions
Automatic Safety Shut-Off,
If the induction unit is left on for more than 60 seconds without a pan or with an incompatible pan, the
unit will automatically shut off.
Material Compatibility Detector
If the pan's material or it's dimensions are not suitable for the induction unit, the power indicator light
will not light.
Overtime Detector
If the pan is left on the induction range for more than 2 hours, or if the user does not operate any
functions for more than 2 hours, the range will automatically shut off.
Small Object Detector
The induction unit will not recognize any objects or utensils smaller than 5cm in diameter. For best
results, use pans that are between 12cm and 26cm in diameter.
Overheating Protection Device,
If the temperature of the pan reaches 250°C, the unit will shut off automatically, there will be a short
warning sound.

SAFETY DEVICES

3

Advertisement

Table of Contents
loading

Table of Contents