System Requirements; Recording With A Dv Connection Cable (Vp-D340I/D380I Only) - Samsung VP-D340 Owner's Instruction Manual

ENGLISH
IEEE 1394 Data Transfer

System requirements

CPU : faster Intel ® Pentium III
Operating system : Windows
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable (VP-D340i/D380i only)

1. Set the power switch to VCR mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording momentarily, press the START/STOP button again.
6. To stop recording, press the
Note
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
72
TM 450Mhz compatible.
® 98SE, ME, XP, Mac OS
(STOP) button.