Advertisement
Register your TAC IP 100 with Vistadial Communications
If your system is connected to the Internet, please click the Register with Vistadial and register your system.
Camden, through its relationship with Vistadial, pre-configures every product
requiring VoIP services to permit a quick, seamless integration to the VistaDial
VoIP services offering. Vistadial technicians are trained on the equipment you
are installing and hence, can provide excellent technical support during first
time installation or future service requirements.
Registration allows for on-going program updates, technical support regarding VoIP service and Electronic
Funds Transfer (EFT). EFT programs automate billing to the property management firms and more
importantly return a portion of that revenue back to your firm for as long as you are the dealer of record
for a site.
After successfully registering your VOIP Tele-Entry System, review the phone line status section for the state
of your VOIP call trunks.
The State of a line could be available, bypassed, congested.
7
If one or all the trunk lines are bypassed or Congested. Refer to the "Resolve Current Faults Codes"
section to resolve the associated fault codes.
Note
You may still proceed to place your first test call if a minimum of one phone lines are available.
Place Your First Call
Navigate to the "Audio/Video Configuration & Testing" by clicking on the "Configure Audio/Video" button
from the main admin page.
In the Asterisk Test Number field, enter a phone number you wish to call. Pressing the dial button will
have the system place a call to the number. You may end the test call by pressing the Hang Up button. The
State field tells you if the VOIP Tele-Entry System is idle or placing a call.
Advertisement
