Date/Time - Samsung SCD67/D70 Owner's Instruction Book

Advanced Recording

DATE/TIME

The DATE/TIME function works in both CAMERA and PLAYER mode.
The date and time is automatically recorded on a special data area of the tape.
You can choose what you want to display - either the date, the time or both.
DATE only
TIME only
DATE/TIME
1. Press the MENU ON/OFF button.
The menu list will appear.
2. Turn the MENU DIAL to DATE/TIME.
3. Press ENTER to enter the sub-menu.
4. Using the MENU DIAL, select the DATE/TIME mode.
Press ENTER to confirm the DATE/TIME mode and return to the main menu.
If you exit the sub-menu without pressing ENTER, the DATE/TIME mode is not changed.
5. To exit, press the MENU ON/OFF button.
Notes
The DATE/TIME is not affected by the OSD ON/OFF (ENTER) button.
The DATE/TIME will read "– – – " in the following conditions.
– During playback of a blank section of tape.
– If the tape was recorded before setting the DATE/TIME in the camera's memory.
– When the Lithium Battery becomes weak or dead.
(MENU) SP STBY DATE/TIME
REC LAMP ...............OFF
WIND CUT ...............OFF OFF
AUDIO MODE ..........12 BIT DATE
PHOTO MODE.........FIELD TIME
DISPLAY...................LCD DATE/TIME
DATE/TIME .............OFF
SEL.:ENTER
: MENU : MENU
ENGLISH
SP STBY
49