Samsung SC-D455 Owner's Instruction Book page 84

[ ENGLISH ]
USB Interface
Transferring a Digital Image through a USB Connection
÷ The camcorder supports both USBI.1 and 2.0 standards. (Depends on the PC specification)
÷ You can easily transfer recorded files from a Memory Card to a PC without additional add-on cards via a USB connection.
÷ If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the Camcorder.
USB Connection speed depends on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
• Windows 98SE/ME - Full Speed USB
• Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
• Windows XP - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
CPU
OS(Operating System)
Memory
HDD capacity
Resolution
Minimum
InteP Pentium IIVM, 600MHz
Windows ®98SE/ME
128MB
1GB or more
1024 x 768 dots
24bit Color
USB USB 1.1
It is not available for Macintosh systems.
Windows System
Recommended
[ntel® Pentium 4
TM
, 2GHz
Windows ®2000/XP
512MB
2GB or more
1024 x 768 dots
24bit Color
USB 2.0 High Speed
[ Notes ]
• USB 2.0 works only for removable disk functions.
• On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.
• On a slower PC than recommended, movie playback may skip frames or operate unexpectedly,
• InteP Pentium Ill
TM
or Pentium 4
TM
is a trademark of the Intel Corporation.
• Windows®is a registered trademark of the MicrosofP Corporation.
• All other brands and names are property of their respective owners.
• Operations are not guaranteed for all of the recommended computer environments mentioned above.
• Do not connect the Camcorder to a PC using both DV and USB cables, It may not operate properly.
• In CAMERA mode, be sure that the Memory card is inserted into Camcorder before connecting USB cable.
If no Memory card or an unformatted Memory card is inserted, PC will not recognize your camera as a removable disk.
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.
If you disconnectthe USB cable from the PC or the Camcorder duringthe data transfer,the data transfer will stop and the data may be damaged.
If you connectthe USBcable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly.
If this occurs, remove all other USB devices and try the connection again.