Cutting Off Wind Noise (Wind Cut) - Samsung SC-D455 Owner's Instruction Book

Advanced Recording
[ENGLISH
+ The Wind Cut function works in both Camera and Player (Audio dubbing) modes.
Usethe WindCut when recordingin windyplaces such as the beach or near buildings.
+ The Wind Cut function minimizes wind noise or other noise while recording.
When the wind cut is on, some low pitched tones sounds are eliminated along with the sound of the wind.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE.
@
3. Press the MENU button.
• The menu list will appear.
4. Move the Menu selector to the left or right to select Record, then press the Menu selector. \ _Nove_Select_Exit /
f
5. Move the Menu selector to the left or right to select Wind Cut, then press the Menu _Y __
selector. R_Node
6. To activate the Wind Cut function, move the Menu selector to the left or right to select On, then
press the Menu selector.
ect _E×it
\ J
7. Toexit, press the MENU button.
• Wind Cut ([P']) icon will be displayed.
[ Note ]
Make sure Wind Cut is set to off when you want the microphone to be as sensitive as possible.
f_ STSY [] [] Oj_0:lO_
IF] J
\ /