[ ENGLISH
]
Playback
+ The Audio Dubbing function works only in Player Mode.
+ You cannot dub sound on a pre-recorded tape in LP or 16 bit mode.
+ You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
+ Use the internal or an external microphone (not supplied) or other audio equipment.
+ The original sound will not be erased.
Dubbing Sound
1. Set the Power switch to PLAYER.
•
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the Camcorder.
3,
4.
5.
Set the Mode switch to TAPE.
•
When you wish to dub using the ExternalA/V input, connect the Multi-AV
cable to the Multi-AVjack at the front side of camcorder. (see to page 75)
Press the I,/11(PLAY/STILL) button and find the time frame of the scene to
be dubbed.
Press the I,/11(PLAY/STILL) button to pause the scene.
Press the A.DUB button on the remote control.
•
Audio dubbing (i':)icon
will be displayed.
•
The Camcorder is ready for dubbing.
6. Press the I,/11(PLAY/STILL) button to start dubbing.
7. Press the II(STOP) button to stop the dubbing.
[ Notes ]
•
You cannot use the Audio dubbing function while playing a write protected video tape.
•
To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the AV cable to connect to
external sound source input.
To dub an external sound source, set the AV In/Out function to AV In. (see page 75).