Product Specification - Recharge Mower PMLI-14 Safety, Assembly, Operating And Maintenance Instructions

Product Specification

Lawn mower
Model: PMLI-14
Mains:36V, 4Ah
Charging time: 2-3 hours
Cutting width: 380mm
No load speed:3000rpm
Cutting system: rotary blade
Cutting height: 6 settings, 25-75mm
Grass catcher bag capacity:40L
Battery Pack
Art.No.:LI-14BATT
Battery type: Lithium Battery
Battery Voltage:36V,4Ah
Charging time: 2-3 hours
Battery Charger
Art.No.:PAS42AA-W04201000
Input:100-240V-50/60Hz
Output voltage:42V
Charging current:1.0A
Assembly
Do not connect the battery or the safety key before the mower is completely assembled.
1. Fasten push bars
The push bar is already fully assembled. It only needs to be unfolded to the desired position.
First unfold the quick fold lever and loosen the handle knob (See Figure 1).
Expand the handle, make sure the upper handle and lower handle match well.
Then screw them tight with the handle knob and swing nuts. The swing nuts should be hand tightened only.
Never use a spanner or any other tool to tighten them.
Secure bottom of handle with locking mechanism provided. See Figure 2
Figure 1 Figure 2
6