Starting And Stopping - Recharge Mower PMLI-14 Safety, Assembly, Operating And Maintenance Instructions

36v lithium push mower
Table of Contents

Advertisement

4. Starting and Stopping

Attention! Rotary cutting blade, The blade continues to rotate for a few seconds after the
machine is switched off. Allow the motor/blade to stop rotating before switching "on" again. Do not
rapidly switch off and on.
Starting
Figure 11
Before starting make sure the battery pack is put into the mower and put the safety key into its socket.
Figure 12
Switch on the motor with the mower placed on level and firm ground, not in high grass - alternatively tilt slightly,
then follow the procedures below:
Press and hold the safety button
Squeeze the switch lever towards the handle
Release the safety button and squeeze the safety handle firmly.
Figure 11
Stopping
Release switch lever
Mowing with the grass catcher bag – Ensure the Mulching Insert is NOT installed
The grass catcher bag must be emptied as soon as grass is left lying on the lawn.
Danger! Foreign bodies thrown out of the mower can cause injuries! Only lift safety flap with the motor
switched off and when the cutting blade has come to a standstill.
1. Lift safety flap and remove the grass catcher bag by the handle.
2. Empty the grass catcher and replace on the back of the mower using the mounting hook on the under deck.
Mowing without the grass catcher bag – MULCHING.
Danger! Risk of injury! Do not put your hand in the discharge opening
When the safety flap is released, this closes automatically and covers the discharge opening.
For Mulching purposes, INSTALL – the mulching insert into the discharge opening and close the flap.
This will secure the mulching adaptor into place. Grass will drop to back to the lawn – NO grass catcher required.
Figure 12
11

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Recharge Mower PMLI-14

Table of Contents