Stihl RMI 632 P Instruction Manual page 74

Hide thumbs Also See for RMI 632 P:
Table of Contents

Advertisement

Available languages

Available languages

English
Message
2031 – Charging failure
Check charging contacts
2032 – Battery
temperature
Outside temperature
range
2040 – Battery
temperature
Outside temperature
range
2050 – Adapt mowing
plan
Extend active times
2060 – Mowing
completed
Press OK to release
2120 – Child lock
Child lock active
4001 – Internal fault
Outside temperature
range
4002 – Rollover
4003 – Hood lifted
Check hood, Then press
OK
4004 – Internal fault
Press OK to release
72
Possible Cause
Charging cannot be started.
Temperature in battery during charging too low
or too high.
Temperature in battery when starting mowing
operation too low or too high.
Active times have been shortened/deleted or
the mowing duration has been extended – the
stored active times are insufficient for the
necessary mowing operations.
Mowing in secondary area successfully
completed.
– Impact sensor triggered several times
consecutively.
– Robotic mower has been lifted during travel.
Temperature in battery or inside the machine
too low or too high.
See message 1000.
Hood has been lifted.
– Error in the program sequence.
– Power failure during automatic operation.
– Robotic mower is located outside the mowing
area.
21 Troubleshooting Guide
Remedy
► Check the charging contacts on the docking
station and robotic mower and clean if
necessary.
► Confirm the message by pressing the OK
button.
► Allow the robotic mower to warm up or cool
down.
► Allow the robotic mower to warm up or cool
down.
► Extend the active times or shorten the
mowing duration.
► Return the robotic mower to the mowing area
and dock to charge the battery.
► No action required if the impact sensor is not
triggered again, the message automatically
becomes inactive within max. 1 minute.
► Deactivate the child lock.
► Allow the robotic mower to warm up or cool
down.
► See message 1000.
► Check the hood and confirm the message by
pressing the OK button.
► Check power supply to the docking station.
The LED must glow red during operation.
► Return the robotic mower to the mowing area.
► Confirm message by pressing the OK button.
0478-131-3046-A

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents