Table of Contents
Advertisement
Variometer NX-Vario
paragliding and hang gliding. Hardware is implemented on the Arduino platform.
· Dimensions: 94x94x35mm;
· Main board – Arduino Nano (ATMEGA328P);
· Sensor BMP180;
· LCD screen 16x2 (white symbols, blue background);
· Power consumption 45mAh in standby mode (with backlight ON), 25mAh in standby
mode (with backlight OFF);
· Powered with one 9V Brick Battery;
· Estimated period of operation on one battery is not less than 10 hours of continuous
operation with the backlight ON, with backlight OFF up to 20 hours;
· The case is equipped with a leg fastener (Velcro 5 cm wide). Also the case has two lugs
for securing the safety rope.
Altimeters
Pressure setup (QNH)
Climb threshold setup (for vario indication)
Descent threshold setup (for vario indication)
Light indication for climb/descent
Mute for button beep
Mute for vario
Falling alarm
Long beep for certain altitude pass on climb
Long beep for certain altitude pass on descent
Vario modes
Switchable LCD backlight
Flight timer
Max altitudes display
Max and min vario display
Temperature display
is the beginner's device. It has all necessary functions for
Specifications
Functions
2
3
+
+
+
+
+
+
+
+
+
2
+
+
+
+
+
Advertisement
Table of Contents
