Table of Contents
Advertisement
After the assembly of the circuit and loading the firmware in the controller, the device
must turn on and show you the welcome screen. If something went wrong, check the
connection diagram!
P.S. If, or more correctly, when the device shows up bugs, throw me a description on my
E-mail (xonix2004@list.ru), or you can find me in VK or Facebook for more convenient
communication. If you know some tricky function that should be built into the variometer, but
did not find it in the list of available ones, also write. If it's possible, I'll try to implement and
upload a new version of the firmware.
P.P.S. I will add from myself, although there are some shortcomings in the work of the
device (in particular, the thermometer can pick up 3-5 degrees, but it's understandable, the
sensor is hidden deep in the case), personally I'm glad with the device's work at the moment.
Next on the list is a vario in a much more compact case, based on Arduino Pro Mini with OLED
display, BMP280 sensor and reduced current consumption. I hope this idea will not be put on
hold.
Px3.S. I have to honestly admit, this is my first serious project on Arduino and this is my
first code for seven years after graduation from University. Therefore, the code itself is creepy
enough, complicated, poorly optimized and all stands on crutches! But it works! And, as is
known, works - do not touch! And, in general, this is not a bug, it's a feature! J
Px4.S. And I wildly apologize for my terrible English to all foreign readers, if, of course,
there are such! I sometimes even used Google Translate - there is no forgiveness for me!
Yours, nuclear_XONIX (Iliushenko Andrei, Ильюшенко Андрей)
Live long and fly safe! J
14
Advertisement
Table of Contents
