Initial Setting : System Menu Setting; Setting The Clock (Clock Set) - Samsung SC-DC171 Owner's Instruction Book

ENGLISH

Initial Setting : System Menu Setting

Setting the Clock (Clock Set)

 Clock setup works in Camera Mode/Player Mode/M.Cam Mode/M.Player Mode. page 26
 The date/time is automatically recorded onto a disc. Before recording, please set the date/time.
1. Set the [Mode] switch to [DISC] or [CARD]. (SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select <System>, then press the [Joystick].
5. Move the [Joystick] up or down to select <Clock Set>, then press the [Joystick].
 The month will be highlight first.
6. Move the [Joystick] up or down to set current month, then press the [Joystick].
 The day will be highlighted.
 To adjust the clock, select the Year, Month, Day, Hour, Min, or AM/PM by pressing the
[Joystick], then move the [Joystick] up or down to set respective values.
7. You can set the day, year, hour, minute, and AM/PM following the same procedure after
setting the month.
8. Press the [Joystick] after setting minute.
 A message <Complete!> is displayed.
9. To exit, press the [MENU] button.
Notes
 After the Lithium Battery loses its charge (after about 6 months), the date/time appears
on the screen as 12:00 AM JAN.01.2007.
 You can set the year up to 2040.
 If the Lithium Battery is not installed, data inputted will not be backed up.
 Display illustrations in this manual
OSD illustrations of model SC-DC173U are used in this manual. Some of the OSD
items shown in this manual may differ slightly from the actual items on your DVD Camcorder.
30
(Camera)] or [ (Player)].
4
Camera Mode
►System
Clock Set
Beep Sound ►On
Language ►English
Demonstration ►On
Move OK Select MENU
5
Camera Mode
►System
Clock Set
JAN 01 2007
Beep Sound
12 : 00 AM
Language
Demonstration
OK MENU
Adjust Select
8
Camera Mode
►System
Clock Set
JAN 01 2007
Beep Sound
12 : 00 AM
Language
Demonstration
Complete!
Move OK Select MENU
Exit
Exit
Exit